Cisco Systems WSC2960X48TDL Instrukcja Użytkownika Pobierz pdf (Strona 96)

PurposeCommand or Action

Configures the power consumption of powered devices

connected to each the PoE port on the switch.

power inline consumption default wattage

Example:

Switch(config)# power inline consumption

default 5000

Step 3

The range for each device is 4000 to 30000 mW (PoE+). The

default is 30000 mW.

When you use this command, we recommend you

also enable power policing.

Note

Returns to privileged EXEC mode.end

Example:

Switch(config)# end

Step 4

Displays the power consumption status.show power inline consumption default

Example:

Switch# show power inline consumption default

Step 5

Budgeting Power to a Specific PoE Port

Perform this task to configure the amount of power budgeted to a powered device connected to a specific PoE

port:

SUMMARY STEPS

configure terminal

no cdp run

interface interface-id

power inline consumption wattage

end

show power inline consumption

DETAILED STEPS

PurposeCommand or Action

Enters global configuration mode.configure terminal

Example:

Switch# configure terminal

Step 1

Catalyst 2960-X Switch Interface and Hardware Component Configuration Guide, Cisco IOS Release 15.0(2)EX

84 OL-29034-01

Configuring PoE

Budgeting Power for Devices Connected to a PoE Port

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 107 108

Brak uwag

Cisco Systems WSC2960X48TDL Instrukcja Użytkownika Strona 96