Cisco Systems WSC2960X48TDL Instrukcja Użytkownika Pobierz pdf (Strona 30)

*Mar 1 00:01:00.171: %USB_CONSOLE-6-MEDIA_RJ45: Console media-type is RJ45.

*Mar 1 00:01:00.431: %USB_CONSOLE-6-MEDIA_USB: Console media-type is USB.

switch-stack-2

*Mar 1 00:01:09.835: %USB_CONSOLE-6-MEDIA_RJ45: Console media-type is RJ45.

switch-stack-3

*Mar 1 00:01:10.523: %USB_CONSOLE-6-MEDIA_RJ45: Console media-type is RJ45.

When the USB cable is removed or the PC de-activates the USB connection, the hardware automatically

changes to the RJ-45 console interface:

switch-stack-1

Mar 1 00:20:48.635: %USB_CONSOLE-6-MEDIA_RJ45: Console media-type is RJ45.

You can configure the console type to always be RJ-45, and you can configure an inactivity timeout for the

USB connector.

USB Type A Ports

The USB Type A ports provide access to external USB flash devices, also known as thumb drives or USB

keys. The switch supports Cisco 64 MB, 256 MB, 512 MB and 1 GB flash drives. You can use standard Cisco

IOS command- line interface (CLI) commands to read, write, erase, and copy to or from the flash device. You

can also configure the switch to boot from the USB flash drive.

For information about configuring the switch to boot from a USB flash drive, refer to the Catalyst 2960-X

Switch System Management Configuration Guide.

For information about reading, writing, erasing, and copying files to or from the flash device, refer to the

Catalyst 2960-X Switch Managing Cisco IOS Image Files Configuration Guide.

Interface Connections

Devices within a single VLAN can communicate directly through any switch. Ports in different VLANs cannot

exchange data without going through a routing device.

Catalyst 2960-X Switch Interface and Hardware Component Configuration Guide, Cisco IOS Release 15.0(2)EX

18 OL-29034-01

Configuring Interface Characteristics

Interface Connections

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 107 108

Brak uwag

Cisco Systems WSC2960X48TDL Instrukcja Użytkownika Strona 30