Cisco Systems WSC2960XR48FPSI Instrukcja Użytkownika Pobierz pdf (Strona 93)

PurposeCommand or Action

Returns to global configuration mode.exit

Example:

Switch(config-if)# exit

Step 4

Repeat Steps 2 through 4 on a second interface in Switch

A or in Switch A stack.

Step 5

Returns to privileged EXEC mode.end

Example:

Switch(config)# end

Step 6

Verifies your entries. In the display, make sure that the

interfaces are configured as trunk ports.

show running-config

Example:

Switch# show running-config

Step 7

When the trunk links come up, Switch A receives the

VTP information from the other switches. This

show vlan

Example:

Switch# show vlan

Step 8

command verifies that Switch A has learned the VLAN

configuration.

Enters global configuration mode.configure terminal

Example:

Switch# configure terminal

Step 9

Defines the interface on which to set the STP cost, and

enters interface configuration mode.

interface interface-id

Example:

Switch(config)# interface gigabitethernet1/0/1

Step 10

Sets the spanning-tree path cost to 30 for VLANs 2

through 4.

spanning-tree vlan vlan-range cost cost-value

Example:

Switch(config-if)# spanning-tree vlan 2-4 cost

Step 11

Catalyst 2960-XR Switch VLAN Configuration Guide, Cisco IOS Release 15.0(2)EX1

OL-29440-01 79

Configuring VLAN Trunks

Configuring Trunk Ports for Load Sharing

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 177 178

Komentarze do niniejszej Instrukcji

Brak uwag

Cisco Systems WSC2960XR48FPSI Instrukcja Użytkownika Strona 93

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Switche sieciowe Cisco Systems WSC2960XR48FPSI