Cisco Systems WSC2960XR48FPSI Instrukcja Użytkownika Pobierz pdf (Strona 130)

DETAILED STEPS

PurposeCommand or Action

Enters the global configuration mode.configure terminal

Example:

Switch# configure terminal

Step 1

Changes the retry count. The retry range is 1 to 10; the default

is 3.

vmps retry count

Example:

Switch(config)# vmps retry 5

Step 2

To return the switch to its default setting, use the no

vmps retry global configuration command.

Note

Returns to privileged EXEC mode.end

Example:

Switch(config)# end

Step 3

Verifies your entry in the Server Retry Count field of the

display.

show vmps

Example:

Switch# show vmps

Step 4

(Optional) Saves your entries in the configuration file.copy running-config startup-config

Example:

Switch# copy running-config startup-config

Step 5

Troubleshooting Dynamic-Access Port VLAN Membership

Problem The VMPS shuts down a dynamic-access port under these conditions:

•

Problem The VMPS is in secure mode, and it does not allow the host to connect to the port. The VMPS

shuts down the port to prevent the host from connecting to the network.

•

Problem More than 20 active hosts reside on a dynamic-access port.

Solution To reenable a disabled dynamic-access port, enter the shutdown interface configuration command

followed by the no shutdown interface configuration command.

Catalyst 2960-XR Switch VLAN Configuration Guide, Cisco IOS Release 15.0(2)EX1

116 OL-29440-01

Configuring VMPS

Troubleshooting Dynamic-Access Port VLAN Membership

1 2 ... 125 126 127 128 129 130 131 132 133 134 135 ... 177 178

Brak uwag

Cisco Systems WSC2960XR48FPSI Instrukcja Użytkownika Strona 130