Cisco Systems QC-29 Instrukcja Użytkownika Pobierz pdf (Strona 10)

Configuring Modular Quality of Service Congestion Management on Cisco IOS XR Software

How to Configure QoS Congestion Management on Cisco IOS XR Software

QC-38

Cisco IOS XR Modular Quality of Service Configuration Guide

Restrictions

The amount of bandwidth configured should be large enough to also accommodate Layer 2 overhead.

A policy map can have all class bandwidths specified in kilobits per second or percentages but not a

mixture of both in the same class.

The bandwidth command is supported only on policies configured on outgoing interfaces.

SUMMARY STEPS

1. configure

2. policy-map policy-name

3. class class-name

4. bandwidth {kbps | percent value}

5. bandwidth remaining percent value

6. exit

7. class class-name

8. bandwidth {kbps | percent value}

9. bandwidth remaining percent value

10. exit

11. exit

12. interface type instance

13. service-policy {input | output} policy-map

14. end

commit

15. show policy-map interface type instance [input | output]

DETAILED STEPS

Command or Action Purpose

Step 1

configure

Example:

RP/0/RP0/CPU0:router# configure

Enters global configuration mode.

Step 2

policy-map policy-name

Example:

RP/0/RP0/CPU0:router(config)# policy-map

policy1

Enters policy map configuration mode.

• Creates or modifies a policy map that can be attached to

one or more interfaces to specify a service policy.

Step 3

class class-name

Example:

RP/0/RP0/CPU0:router(config-pmap)# class class1

Specifies the name of the class whose policy you want to

create or change.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Komentarze do niniejszej Instrukcji

Brak uwag

Cisco Systems QC-29 Instrukcja Użytkownika Strona 10

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Oprogramowanie Cisco Systems QC-29