Cisco Systems OL-7029-01 Instrukcja Użytkownika Pobierz pdf (Strona 41)

100

101

2-19

Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference

OL-7029-01

Chapter 2 Content Switching Module with SSL Commands

priority (fault tolerant submode)

To set the priority of the CSM, use the priority command in the SLB fault-tolerant configuration

submode. To restore the priority default value, use the no form of this command.

priority value [alt value]

no priority

Syntax Description

Defaults Value is 10.

Command Modes SLB fault-tolerant configuration submode

Command History

Usage Guidelines The CSM with the largest priority value is the primary CSM in the fault-tolerant pair when the modules

are both operating.

Examples This example shows how to set the priority value to 12:

Cat6k-2(config-slb-ft)# priority 12

Related Commands ft group

preempt (fault tolerant submode)

show module csm ft

alt (Optional) Configures the alternate priority value for the standby

CSM.

value (Optional) Priority of a CSM; the range is from 1 to 254.

Release Modification

CSM release 1.1(1) This command was introduced.

CSM release 4.2(1) Adds the alt keyword to specify an alternate value that is sent to the

standby CSM.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 341 342

Komentarze do niniejszej Instrukcji

Brak uwag

Cisco Systems OL-7029-01 Instrukcja Użytkownika Strona 41

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Oprogramowanie Cisco Systems OL-7029-01