Cisco Systems UCS C210 Instrukcja Użytkownika Pobierz pdf (Strona 95)

C-1

Cisco UCS C210 Server Installation and Service Guide

OL-20887-02

APPENDIX

RAID Controller Considerations

This appendix contains the following sections:

• Supported RAID Controllers and Required Cables, page C-1

• Enabling the Integrated Intel ICH10R RAID Controller in the BIOS, page C-2

• Enabling the Mezzanine Card RAID Controller in the BIOS, page C-3

• RAID Controller Cabling, page C-3

• How to Determine Which Controller Is in Your Server, page C-4

• How to Disable Quiet Boot for CIMC Firmware Earlier Than Release 1.2(1), page C-5

• How To Launch Option ROM-Based Controller Utilities, page C-5

• Restoring RAID Configuration After Replacing a RAID Controller, page C-6

• For More Information, page C-7

Supported RAID Controllers and Required Cables

This server supports the RAID controller options and cable requirements shown in Table C-1.

Note This server contains a default drive backplane called an extender, which supports controller connection

for up to 8 drives. To control more than 8 drives (maximum 16), the server must be ordered with the

optional expander backplane. The extender/expander backplanes are not field-upgradeable.

Note Different cables might be required when connecting to the extender versus the expander, as described in

Table C-1.

Note Do not mix controller types in the server. Dual controllers are not supported.

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 103 104

Brak uwag

Cisco Systems UCS C210 Instrukcja Użytkownika Strona 95