Cisco Systems PA-POS-1OC3 Podręcznik Użytkownika Strona 61
- Strona / 90
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
3-15
PA-POS-1OC3 Single-Port Port Adapter Installation and Configuration Guide
OL-6514-04
Chapter 3 Removing and Installing the PA-POS-1OC3
Replacing the SFP Optics Module
To remove the SFP optics module, perform the following steps:
Step 1 Attach an ESD wrist strap to your wrist and to the ESD connection socket on the chassis or to a bare
metal surface on the chassis or frame.
Step 2 Disconnect the network fiber cable from the SFP optics module connector.
Step 3 Remove the SFP optics module from the slot.
a. Using your thumb and forefinger, grip the colored latching band on the front of the SFP optics
module.
b. Gently push the latching band back toward the SFP slot. You may hear a click or feel the SFP optics
module disengage from the holding latch.
Note Not all SFP optics modules have the same kind of latching mechanism.
c. While still holding the latching band, pull the SFP optics module forward and out of the slot.
Step 4 Set the SFP optics module aside on an antistatic surface.
Installing the SFP Optics Module
Use the following procedure to install the SFP optics modules:
Step 1 Attach an ESD-preventive wrist strap between you and an unpainted chassis surface.
Step 2 Verify that you have the correct SFP optics module for your installation.
a. Check the part number and distance information on the SFP optics module label.
b. If the distance information is not on the label, use the show controller pos x/y command to display
the information after the SFP optics module is installed. See “Verifying the SFP Optics Module
Installation” section on page 3-16 for directions.
Step 3 Align the SFP optics module with the slot so that the label is facing away from the handle.
- Text Part Number: OL-6514-04 1
- CONTENTS 3
- Contents 4
- OL-6514-03 4
- Document Version History 7
- Objectives 7
- Organization 8
- Related Documentation 8
- Guidelines 10
- PA-POS-1OC3 Overview 11
- SONET/SDH Overview 12
- Features 13
- Interface Specifications 14
- Network Management Support 15
- Encapsulation Method Support 16
- Cables and Connectors 17
- OL-6514-04 18
- Port adapter slot 19
- ENHANCED ATM 21
- Port adapter slot 0 22
- Port adapter slot 1 22
- Port adapter 22
- ROUTE SWITCH PROCESSOR 2 24
- Preparing for Installation 35
- Cisco 7200 VXR Routers 36
- Cisco 7201 Router 37
- Cisco 7301 Router 37
- Cisco 7401ASR Router 37
- Cisco 7500 Series Routers 37
- Cisco 7600 Series Routers 37
- Safety Guidelines 38
- Attention 39
- Avvertenza 39
- Advarsel 39
- ¡Advertencia! 40
- Varning! 40
- Safety Guidelines 42
- Telephone Wiring Guidelines 44
- FCC Class A Compliance 45
- FCC Class A Compliance 46
- Handling Port Adapters 47
- Online Insertion and Removal 48
- Warnings and Cautions 49
- Statement 1029 50
- Cisco 7200 51
- ROUTE SWITCH PROCESSOR 57
- SUPERVISOR I 58
- WS-X6K-SUP1 58
- Class 1 laser product 59
- Statement 1008 59
- Statement 1051 59
- Statement 1040 60
- command to display 61
- PA-POS-1OC3 62
- Configuring the PA-POS-1OC3 65
- Configuring the Interfaces 66
- Shutting Down an Interface 67
- Customizing the Configuration 72
- Setting the MTU Size 73
- Configuring Framing 73
- Configuring APS 75
- Checking the Configuration 76
- PA-POS-1OC3 installed: 79
- Using the show diag Command 81
- Cisco 7301 router: 82
- Using loopback Commands 87
- Push Mode Description 88
- PA-POS-1OC3 Error Messages 89
Powiązane produkty i podręczniki dla Routery Cisco Systems PA-POS-1OC3
Routery Cisco Systems SRX400 Instrukcja Użytkownika
(206 strony)
(206 strony)
(12 strony)
(49 strony)
(156 strony)
Routery Cisco Systems WAG54GS Instrukcja Użytkownika
(335 strony)
(335 strony)
Routery Cisco Systems PAP2 Instrukcja Naprawy
(46 strony)
(46 strony)
Checkline Series-2 manuali
Manuali dei proprietari e guide per l'utente per Sensori Checkline Series-2.
We fornisce 1 manuali pdf Checkline Series-2 per scaricare gratuitamente in base al tipo di documento: Manuale Utente
Komentarze do niniejszej Instrukcji