Cisco Systems CF2001P Instrukcja Użytkownika Pobierz pdf (Strona 15)

CF2001P

– 14 –

4004-7715-01

■

Connecting the Equipment Cables

1. Insert a connector on the DTP32 cable (4)

into the I/O port on the side of the X-Rite,

and then insert the other connector of the

cable into port B on the selector.

2. Using the RS232 straight cable (5), connect

the COM 1 port of the computer to port C on

the selector.

NOTE

Make sure that the RS232 straight cable is

connected to the COM 1 port of the com-

puter.

3. Using RS232 straight cable (6), connect

DB25 of the converter to port A of the selec-

tor.

4. Connect the IR port cable (8) to the printer.

5. Using a common screwdriver, tighten the

four screws shown in the illustration, and

then connect the harnesses of the IR port

cable to the terminals on the converter.

TXA terminal: brown harness

TXB terminal: red harness

RXA terminal: orange harness

RXB terminal: blue harness

NOTE

Be sure to connect the harnesses of the IR

port cable to the specified terminals.

C4004U559AA

C4004U560AA

C4004U561AA

C4004U562AA

C4004U563AA

Blue

Orange

Red

Brown

NEXTNEXT

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 42 43

Brak uwag

Cisco Systems CF2001P Instrukcja Użytkownika Strona 15