
18
Recommended Tools and Supplies
Table 2 lists the recommended tools and supplies.
Ta b l e 2 Recommended Tools and Supplies
Quantity Description Comments
1 Number 2 Phillips screwdriver —
1 Wire-stripping tool —
1 Crimping tool This tool must be large enough to accommodate the girth of the
grounding lug when you crimp the grounding cable into the lug.
1 2-hole chassis grounding lug
Included in the accessory kit.
The 90 degree grounding lug has two M5 holes spaced 0.63 in
center to center. If the lug from the accessory kit is misplaced, use
an alternate lug (for example, Panduit LCD6-10AF-L or Pencom
EL1048).
1 Grounding wire
6 AWG (16 mm
2
)
The length of the grounding wires depends on the location of your
chassis within the site and its proximity to proper grounding
facilities.
2 Two M5 (metric) phillips head screws Included in the accessory kit for use to attach the chassis ground
to the chassis.
1 Antistatic mat and ESD-wrist strap —
10 2-hole Power Supply Lugs Included in the accessory kit. Lugs are for power and ground to the
DC PEM.
Panduit LCD4-14AF-L, 2-hole, M6, 90 degree, 4 AWG wire, 0.63
spacing.
5 Power supply wire 4 AWG (25 mm2)
1 10 mm socket wrench This is used for securing the M6 nuts on the PS DC inputs and
ground terminals.
The unit “mm” stands for milli meter.
Komentarze do niniejszej Instrukcji