Cisco Systems 1500 SERIES Instrukcja Użytkownika Pobierz pdf (Strona 18)

Cisco Confidential - Draft 1

2-18

Cisco Aironet 1500 Series Outdoor Mesh Access Point Hardware Installation Guide

OL-9977-05

Chapter 2 Mounting Instructions

Mounting the Access Point

Step 1 From the pole mount kit, use four of the supplied short bolts, lock washers, and flat washers to attach

the pole mount kit adjustment plate to the access point mounting plate as shown in Figure 2-8. Tighten

the bolts to 15 to 20 ft. lbs. (20 to 27 Nm).

Figure 2-8 Adjustment Plate Attached to the Mounting Plate

Step 2

Select a mounting location. You can attach the access point to any pole from 1.66 to 3.35 in. (4.22 to

9.02 cm) in diameter.

Note If you will be using a streetlight power tap adapter, position the access point within 3 ft (1 m) of

the outdoor light control.

Step 3 Loosely assemble the pole clamp components around the pole and thread the four long bolts into the

clamp adjustment plate. Figure 2-9 shows the pole clamp attached to a pole with the clamp adjustment

plate positioned on the bolts.

142686

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24

Brak uwag

Cisco Systems 1500 SERIES Instrukcja Użytkownika Strona 18